ARM11 OK6410-A
Snapshots | ||||||||
| ||||||||
Product Introduction | ||||||||
The design of all Forlinx products are originally from ODM projects, therefore they are much more reliable compared with other evaluations boards, OK6410 are the mainstream of ARM11, integrated the concept of "Based on high-end, make learning more meaningful and make product development faster", Forlinx gives your a stable system with rich interfaces and excellent performance, make your work handy all the time, so choose Forlinx and trust Forlinx, and we will just be your side whether you are a new to embedded world or you are experienced engineer, Forlinx are open to make friends with all of you. Forlinx S3C6410 Quality Assurance
Forlinx S3C6410 Performance Assurance
Forlinx S3C6410 Usablity Assurance
| ||||||||
Application areas | ||||||||
For high-end consumer electronics, industrial control, car navigation, multimedia terminals, POS machine, PDA and other areas of the industry.
| ||||||||
Core board - Dimension (W x L x H )5CM x 6CM x 0.5CM
Forlinx OK6410 Core Board Resources | |
CPU |
Samsung S3C6410 Processor,ARM1176JZF-S,Clock 533MHz/667MHz/800MHz |
Memory |
128MB DDR |
FLASH | 1GB NAND Flash, 8-bits ECC, Ensure safe and reliable information storage(2Gb optional); |
Clock | 12MHz,48MHz,27MHz,32.768KHz clock source |
Voltage |
DC 5V |
Interface |
Gold plated B2B connectors |
Temperature |
-20℃~ 75℃ gureenteen, EMC test passed. |
Carrier Board
OK6410 Carrier Board Resources | |
Reset | One Reset key with dedicated chip, stable and reliable |
DIP switch | Boot options, using 8-bit DIP switch. |
Serial | Four serial ports: one 5-line serial port with DB9 female, three 3-line (3.3V TTL) with 2.0 X 20 pins. |
Ethernet | One 100Mb Ethernet, using DM9000AE with connection and transmition status indicators. |
USB HOST | One USB HOST, support USB1.1 protocol,used for mouse and U disk etc. |
USB OTG | One USB Slave,support USB2.0 protocol,using mini-USB socket,can be used for PC connection. |
SD card | One high-speed SD socket, used for SD Memory and SDIO functionality. |
WIFI | One WIFI expension interface |
Audio |
Three 3.5mm standard stereo audio jacks, one for headphone audio output, and one for microphone input, and one for line input. |
LCD |
Touch panel support 4-line resistor, LCD support 3.5, 5.6, 7, 8 inches TFT LCD. and 10.4 inches LVDS. |
Camera |
One CMOS camera,support ITU-R BT601/656 8-bit mode, using 10X2 pin connector, support varies USB cameras. |
RTC | Internal Real Time Clock, with backup battery. |
JTAG | One JTAG interface,using 10x2 pins connector. |
Temperature Sensor | One one line temperator sensor(DS18B20) |
Infrad | One Infra-red sensor (38Khz). |
LED | Four LEDs |
Buzzer | One buzzer with 5V power supply. |
Expension ports |
Three 10×2 pins expansion ports, one includes GNDx1, 1DAx1,8-channel AD, IOx10, and SPIx1, and another one for 8×8 matrix keyboard, the last one includes three 3.3V serial port(one 5-line, two 3-line) |
Testing:
OK6410 development board are fully tested in strong electromagnetic interference environment, high dust environment, high temperature, humidity environment and other harsh industrial environments, no abnormal state of continuous production. |
Board overview snapshot:
Core board dimension:
Linux OS:
Forlinx ARM11 Board, the first company enter the Linux3.0 era |
|
Linux2.6 software resources | |
Cross-compiler | arm-linux-gcc-4.3.2.tgz |
Image Updating options |
|
U-boot |
Version:U-Boot-1.1.6 |
Support boot from NAND Flash | |
Support images updating via USB OTG 2.0 | |
Support command line mode updating images for uboot.bin(Uboot), zImage(Linux), and cramfs(File system) | |
mmc.bin(System on SD card) |
Support updating images directly from SD card, no need for PC connection. |
Support updating file system for both Linux and Android(cramfs/yaffs2). | |
Support updating images(Uboot/Kernel/FS) via USB OTG2.0. | |
Linux Kernel | Version: 2.6.28/2.6.36/3.0.1 |
Supporting Filesystem: YAFFS2/CRAMFS/NFS/UBIFS/NFS/FAT32 and much more. | |
Watch dog driver | |
RTC driver | |
LEDx4 driver | |
KEYx6 driver | |
SPI driver | |
PWM buzzer driver | |
ADC driver | |
Touch screen driver | |
LCD driver(3.5", 4.3", 7", 8",10.4") | |
USB Host driver: support U drive, Bluetooth, USB wifi, USB 3G module, USB barcode scanner, etc. | |
USB Mouse, USB keyboard | |
USB Camera(almost all types you can find on the market) | |
SD driver | |
3G driver | |
MFC(hardware encoder/decoder) Driver | |
CAN bus Driver | |
4 serial port driver | |
SD WIFI driver | |
USB WIFI driver | |
Audio driver(WM9714/WM9713 ALSA interface) | |
Ethernet driver(DM9000A/DM9000AEP/DM9000CIEP) | |
CMOS Camera driver, TV-OUT driver | |
USB to serial driver | |
Matrix keyboard driver | |
Infred receiver driver | |
Temperature sensor driver | |
FrameBuffer driver, support Double Buffering, Max resolution up to 1024x768 | |
Busybox | Version:busybox-1.13.3 |
Command line testing code |
ADC Testing sample code |
Key Testing sample code | |
CMOS Camera Testing sample code | |
LED Testing sample code | |
PMW buzzer Testing sample code | |
Video resolution | Support 320x240, 480x272, 640x480, 800x480, 800x600,1024x768, customized upon request. |
GUI subsystems | Qtopia-2.2.0: Classical GUI system, It can be configured to auto startup with Linux kernel, input support both touch screen and mouse. |
Qt/E-Extended-4.4.3: mobile version of Qtopia | |
Qt/E-4.7.1 newest version of Qt/Embedded, Rich GUI lib, for sleek GUI experience. | |
Support both touch screen and mouse simultaneously. | |
Startup options: Qtopia2.2.0, Qt/Extended-4.4.3, or Qt/E-4.7.1 | |
GUI Testing Programs |
The default desktop GUI is Qtopia2.2.0, you can find all the testing programs mentioned below, they are pre-installed and most importantly, they are open source, you use the code as your reference and free to use them in your projects. |
Browser:Konqueror/E used for verify internet conection,it support multilingual.(tested for English and Chinese) | |
LED Testing:Used for testing LED, and a helpful reference for operating GPIO. | |
Key Testing:There are six keys on the board, they are pre-configured to map(UP, DOWN, LEFT, DOWN, OK, and CANCLE) on Qtopia2.2.0, you can use them just like keys from your Mobile phone, but you can modify the source code to map to any keys for your own need. | |
PWM Buzzer Testing: The on-board is driven by PWM, you can control the buzzer on/off, and set its frequency, a reference for PWM control. | |
ADC Testing:The is a Variable resistor on the board, By rotating the cap, you can get the corresonding value(from 0 to 1023). | |
3G Dial-up:supportWCDMA ,CDMA2000, and TD-SCDMA 3G network,upon dail-up, you can use Konqueror/E to surf the internet. | |
WIFI testing:Configuration tool for WIFI,support both USB WIFI module and SDIO WIFI module, you can configure DHCP, gateway, and DNS, once connected, you also can use Konqueror/E to surf the internet. | |
Photo viewer pragram: just a photo viewer | |
MediaPlayer: used to play multi-media files, MP3, MP4. | |
Calendar, Clock, Calculator, IE explorer. | |
File Manager | |
Terminal | |
Pre installed games. | |
Screen calibrating tool. | |
Plug-in Manager | |
Qt migration documents and video tutorial | Our exclusive "Qt Migration Encyclopedia", which introduce you the Migration instructions for Qtopia2.2.0, Qt/E-Extended-4.4.3, Qt/E-4.7.1, this documents is written in Qt beginner's perspective, and it includes reference for QtCreator, and the classic HelloWorld application development process, a helpful document for your project. |
WINDOWS CE:
Windows CE 6.0 Software resource | |
BootLaoder | EBOOT, support USB2.0 high speed upgrading images |
Upgrading options |
|
CE Version | WinCE 6.0 R3 (open source BSP) |
Supporting drivers, style="FONT-FAMILY: " NT> |
System IRQ and system clock driver |
Serial port driver(support 3 serial port) | |
SD booting,support hot plug, capacity up to 32GB. | |
Nand Flash driver | |
Ethernet driver | |
Audio driver | |
<, FONT style="FONT-FAMILY: Verdana">RTC driver | |
USB Host driver | |
USB OTG driver | |
LCD driver | |
Touch screen driver(four line resistor panel, panel size from 3.5" to 10.4") | |
VGA driver | |
TV driver | |
CMOS driver | |
CMM driver | |
MFC driver | |
JPGE driver | |
IIC driver | |
SPI driver | |
WIFI driver | |
LED driver | |
ADC driver | |
Buzzer driver | |
Temperature sensor driver | |
Testing Programs | CMOS Camera driver |
TV Testing program | |
LED Testing program | |
PWM Buzzer program | |
Temperature sensor testing program | |
ADC Testing program | |
Audio Testing program(PLAY/REPLAY) | |
Three serial ports testing program | |
JPEG hardware decoding testing program | |
MFC(Multi Format Codec)Testing program, support hardware decoding/encoding MPEG-4/H.263/H.264 | |
HybridDivx Testing program | |
OPENGLES Testing program (including OPENGL1.1 and OPENGL2.0) | |
Hardware acceleration |
Samples for DShowFilters |
Samples for HW Jpeg encoder/decoder | |
Samples for HW Mfc decoder | |
Samples for CMM(Codec Memory Menagement) driver | |
Samples for DivX decoder | |
Provide source code, samples and API documents. | |
Application | Porvide registry manager, screen rotator, text editor, Excel editor, Photo albums, media player, and some games. |
LCD Display | Support 320×240, 640×480, 800×600, and 1024×768. |
USB Device | U Driver,USB mouse,USB keyboard,USB HUB,USB bluetooth,USB WIFI |
Development Kit | VS2005 + CE6.0 R3 provide tutorials for setting up enviroment, and related guide. |
BSP Upgrade | We provide BSP upgarde at the first release of microsoft, make sure our users alway have their tools up to date. |
Others | Boot splash and progress bar, MediaPlayer,IE,word, persistance registry, support MFC framework, NET2.0, users can choose the language they are familar with such C/C++/C#/VB. |
Android-2.3.4 (Open source)
From now on, Android fully upgrade to version 2.3.4, more powerful than the other versions, its drivers including network, camera, Bluetooth, 3G, wireless WIFI, U disk, SD card, sound card, touch screen, LCD, keyboard and others, all just for complete dedication to the user. In addition, for all of users to make use of OK6410 development board freely, we decided to release Android as an open source project, which is just dedication to the learners and developers without any reservation, All just for restoring the real value of the development board! We will continue to putting more efforts on the development for leading industry technology trends. | |
Version | Android 2.3.4(Android 2.3.3 is still available) |
Upgrading images options | Support upgrade from SD card in a single step, you don't even need connect PC, just make a upgrading SD card, then plug it in and restart the board, the whole process will be done automaticlly. |
Kernel version | Linux-2.6.36.2 |
Cross-compiler | Android source code compiler package comes with Android source cross-compilers, no additional installation. Android's kernel and Uboot 4.5.1 cross-compiler. Hardware floating point supported, armv6 instruction set. |
USB Disk & SD card Plug and Play | support SD card and U disk plug and play, providing the driver and its source code. |
USB BlueTooth Plug and Play | USB Bluetooth support, you can transfer files between the phone and provide the driver and its source code. |
3G Wireless Card | Support for 3G dial-up, providing the driver source code. |
USB 3G modem | Support for WCDMA, CDMA2000, TD-SCDMS three 3G networks, support USB 3G module, plug and play, miniPCIe interface module also supports 3G, providing the driver source code. |
Ethernet | support internet acess from Ethernet. |
USB WiFi | Support USB wifi, DHCP, DNS,provide Android driver and its source code. |
SDIO WiFi | Support SDIO WIFI,DHCP, DNS,provide Android driver and its source code. |
CMOS Camera | Support Forlinx CMOS Camera(OV9650), provide Linux driver, and Android driver, and Android Testing Application. |
ADB Debugging | Support both linux and Windows. |
Precision Touch Screen | Support Touch screen. |
Touch-screen calibration | Android will automatically run the calibration interface for first time of booting. |
Standard Android keys | Support HOME, CONTEXT, EXIT keyts. |
Serial Port | Support Serial port access from Android. |
LED, PWM, I2C Testing | Support Android access applications and their drivers.(Open source) |
System build Option | Single command to build the whole system, necessary to modify and scripts. |
Manual | Arranged in the detailed instructions, easy to follow, each reading will bring you a new understanding. |
Download:
6410 User manual
1.OK6410-B User manual(Chinese vsersion)
http://115.com/file/dn1lj7yv
2.OK6410-A User manual(Chinese vsersion)
http://115.com/file/aqk98si3 (2011.8.26)
3.TE6410 User manual(Chinese vsersion)
http://115.com/file/bhiln2q2
------------------------------------------------------------------------------------------------------------------------
6410 Video Tutorial
1.Forlinx 6410 common videos:
http://115.com/file/clqok3kp
2.Forlinx 6410 WinCE6 Development Videos:
http://115.com/file/aq7alja8
source code used in videos:
http://u.115.com/file/e6kblvzv
3.Forlinx 6410 QT migration Videos:
http://115.com/file/clqo8dz3
4.Forlinx 6410 WinCE6 development Videos(part II):
http://115.com/file/clqoky7n
5.Forlinx 6410 Linux2.6.36 make boot SD card tutorial videos:
http://115.com/file/dn11gaw7
Forlinx 6410 applications without OS videos:
http://u.115.com/file/dna69zzj
Forlinx 6410 schematics、PCBs(in pdf,PADS format, and protel format)
http://u.115.com/file/bhby050g
Forlinx TE6410/OK6410-A Carrier board Schematics and PCBS( in protel99 format, version 2011.8.17)
http://u.115.com/file/e6yatph8
Forlinx TE6410/OK6410-A/OK6410-B Boot options tools
http://115.com/file/cli73ud4 (2011.5.9)
QT Migration Tools and source code
http://115.com/file/e6kr94he (2011.3.25)
Linux Cross-Compiler
arm-linux-gcc-4.4.1 http://115.com/file/bhd0oj7l# (2011.3.25)
arm-linux-gcc-4.3.2 http://115.com/file/e6kr9lc6# (2011.3.25)
arm-linux-gcc-4.2.2 http://115.com/file/dnh9tqp# (2011.3.25)
arm-linux-gcc-3.3.2 http://115.com/file/e6kr9bfe# (2011.3.25)
------------------------------------------------------------------------------------------------------------------------
Forlinx 6410 Tools 256M Hydai NandFlash
Flash type: HY27UF082G2B
Upgrading Tools and driver available:
http://u.115.com/file/czw53zfd
------------------------------------------------------------------------------------------------------------------------
WinCE6
WINCE6 Demo Applications and source code.
http://u.115.com/file/bh1mymc5
WINCE6 BSP&SDK(For 128MB Memory, 256MB flash)
http://u.115.com/file/clvam9vc
WINCE6 BSP&SDK(For 256MB Memory, 2GB flash)
http://u.115.com/file/e628wlwt
WINCE5&WINCE6 Development Enviroment Applications Download. Readme documents:
http://115.com/file/bhfcxsxl
128MB Memeory + 256M Flash Image for Wince6.
http://u.115.com/file/bhb4529g
256MB Memeory + 2GB Flash Image for Wince6. http://u.115.com/file/e60hxihb 128MB Memeory + 1GB Flash Image for Wince6.
http://u.115.com/file/e60h946b
Image for Big size NK file.(For NK size bigger than memeory size.)
http://115.com/file/e655tlvb
WINCE7
SD image, for Upgrading please reference Wince6. or contact tech support.256MB Memeory + 2GB Flash Image for Wince7.
http://u.115.com/file/clitgx5n
------------------------------------------------------------------------------------------------------------------------
Android2.3
SD system images and tools(2011.8.2)
http://u.115.com/file/bhz2moih
SD Android FS image (2011.8.2)
http://u.115.com/file/e6ylw7u8
android2.3.4 uboot source code (2011.6.17)
http://u.115.com/file/clwr1w1t
android2.3.4 Kernel source (2011.8.2)
http://u.115.com/file/aqzs6sd9
adb_windows_usb_driver (2011.8.2)
http://u.115.com/file/dn67uvqn
android2.3.4 build source code (2011.8.3)
forlinx_android2.3.4_32bit.tar.part1.rar
http://u.115.com/file/aqzs6d80
forlinx_android2.3.4_32bit.tar.part2.rar
http://u.115.com/file/aqzs6my3
android2.3.4 Manual(2011.8.2)
http://u.115.com/file/e6ylwi8b
Android Developer Guide - TE&OK6410 (2011.8.2)
http://u.115.com/file/e6ylw4qt
Compiler
arm-none-linux-gnueabi-arm-2008q3-72-for-linux.tar.bz2 (2011.5.25)
http://u.115.com/file/cli5ddol
arm-linux-gcc-4.3.2 (2011.3.25)
http://115.com/file/e6kr9lc6
------------------------------------------------------------------------------------------------------------------------
Linux3.0.1 Resources
linux3.0.1 SD upgrading Images(uboot, zImage, mmc.bin)
http://115.com/file/e6vktge8 (2011.10.12)
linux3.0.1 Uboot Source code
http://115.com/file/bhfiw8o2 (2011.10.12)
linux3.0.1 Kernel Source code
http://115.com/file/e6vywmbe (2011.10.12)
linux3.0.1 File system and FS Tools.
http://u.115.com/file/clitnmz3 (2011.5.25)
linux3.0.1 Demo Applications
http://u.115.com/file/cliegw6t (2011.5.18)
Linux2.6.28 & Linux2.6.36 Resources
linux2.6.28 SD upgrading Images(Uboot, zImage, mmc.bin)
http://u.115.com/file/e6y6sznv
linux2.6.28 Uboot Source code
http://u.115.com/file/e627hutu
linux2.6.28 Kernel Source code
http://u.115.com/file/dnarjrh3
linux2.6.28 File system and FS Tools.
http://u.115.com/file/clglbe5p
linux2.6.28 Demo Applications
http://u.115.com/fi, , , l, e/aqpcvlm0
linux2.6.28 MFC Demo Application with Source code.
http://u.115.com/file/e6cjgjpv (2011.5.17)
linux2.6.36 SD upgrading Images(Uboot, zImage, mmc.bin)
http://u.115.com/file/e6cv3nvu (2011.5.25)
linux2.6.36 Uboot and Kernel Source code
http://u.115.com/file/bh1fcs9g (2011.5.25)
linux2.6.36 File system and FS Tools. http://u.115.com/file/clitnmz3 (2011.5.25)
linux2.6.36 Demo Applications
http://u.115.com/file/cliegw6t (2011.5.18)
------------------------------------------------------------------------------------------------------------------------
Forlinx 6410 Bare-machine & ucos-ii
Forlinx 6410 Bare-machine Guide Documents.http://u.115.com/file/cliu9e3a
Forlinx 6410 Bare-machine Guide Videos.
http://u.115.com/file/dna69zzj
Forlinx 6410 Bare-machine Demo projects(Based on LED)
http://115.com/file/dnhfie80
------------------------------------------------------------------------------------------------------------------------
Forlinx Expansion Modules(For reference)
Forlinx 6410 CAN Module Documents-6410
http://u.115.com/file/dnc279cc
Forlinx 6410 Serial Module Documents
http://u.115.com/file/e6uw8jaf
Forlinx Matrix Keyboard Documents
http://u.115.com/file/aq3t0l3v
Forlinx VGA board Documents.
http://u.115.com/file/dn6i6qsn
Forlinx Camera Documents.
http://u.115.com/file/clnma6an
Forlinx Cammera Schematic(ov9650)
http://u.115.com/file/clgc4wg3
Forlinx All LCD screen Datasheets (size 3.5"/4.3"/5.6"/7"/8")
http://u.115.com/file/e6uw8c5t
Forlinx 6410 SDIO WIFI Documents
http://u.115.com/file/bh53c0mf
Forlinx USB-TO-SERIAL Board Windows_XP driver.
http://u.115.com/file/bh5328y5
Forlinx Linux Snapshots: | ||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||
WindowsCE Snapshots: | ||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||
Android-2.3 OS: | ||||||||||||||||||||||||||||||||||||||||||||||||
|
Development Kit:
- A Fully Tested 6410-A Board(Including Carrier Board and Core Board)
- OK6410-A User Disk(3)
- One Serial Cable(For PC)
- One RJ45 Cable(For PC directly)
- One USB OTG Cable
- One 5V Power Adapter(Input 120V~230V)
- One Container
- OK6410-A Schematics, Carrier Board Dimension, PCBs
- WindowsCE, Linux, UCOS Source code, Images, Manuals.
- Bare-machine Applications source code, Tutorials, Tools.
- Datasheets for All parts
- Android-2.3.4 build Source code, Images, Manuals, and Tools.
- VS2005 Installation Disk(Evaluation Version)
- Windows CE WINCE6 Plug-in and Patches.
- VMWARE(Evaluation Version)
- Ubuntu 9.10
Combo | Types&Prices($USD) | |
128MB Memory 256M Nand Flash |
256MB Memeory 2GB Nand Flash | |
S3C6410 Core board | .00 | .00 |
OK6410-A | .00 | .00 |
OK6410-A + 3.5" LCD | .00 | .00 |
OK6410-A + 4.3" LCD | .00 | .00 |
OK6410-A + 5.6" LCD | .00 | .00 |
OK6410-A + 7.0" LCD | .00 | .00 |
OK6410-A + 8.0" LCD | .00 | .00 |
- Please leave your order information on the website, our sales will contact you.
for further Information, please email: sales#forlinx.com(replace # with @), - For Tech support please email: support#forlinx.com(replace # with @),
- or Call on Office hour: +86 312 3102650 ext 822.