Description :
The SF100 is a high speed "In System Programming" programmer to update the SPI Flash soldered on board or Freescale MCU using Ezport. The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users. Features :
|
The SF100 USB software tool chain offers high flexibility and fit the different and highest requirements: |
||||||||||||||||||||||||||||||||||
Engineering Graphic User
Interface: For engineers and expert to access advanced features for development, repairing etc. |
Production Graphic User
Interface: For operators in production to control multiple programmers and improve the throughput. |
Command line interface: Customer software can control the multi SF100 programmers (SF100 integration, Control SF100 with Production In Circuit Tester..) |
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||
High performance:
*Please note the programming and verify time will depends on different IC type; please refer to the IC specification before programming. |
||||||||||||||||||||||||||||||||||
Hardware : SF100 is designed with ISP header, through an appropriate connector; users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF100 2x7 header pin out. DediProg also provides the SF100 ISP Cable which is used to connect the SF100 programmer to the 2X4 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF100 ISP Cable 2x4 pin out. |
Table 1: SF100 ISP
Header Pin Out (2x7)
|
Table 2:
ISP Cable Connector Pin Out (2x4)
|
||||||||||||||||||||||||||||||||||||||||||||
Contents :
|
Hardware Requirement for ISP : To have a clear understanding on the different ISP or backup boot methods and different reference schematics, please download our dedicated application notes: AN0103 and AN0106 in the documentation section [Download] |
Option Purchase :
|
|
|