Description :
StarProg-ATE engineering universal IC programmer supports a variety of IC on the market, like EEPROM、SPI NOR 、SPI NAND 、MCU、CPLD…etc. StarProg-ATE also provides users detailed command line for software redevelopment so users can easily integrate StarProg-ATE with 3rd party automation.
Features:

High programming speed
　　Built in high speed processor to achieve high programming speed.

Timing Reference (P+V) STM32L151xB(128KB) W25Q64FVSSIG(64Mb)
20s 23s
Support various IC families and packages
　　Support EEPROM、SPI NOR、SPI NAND、Microcontroller(MCU)、CPLD、FPGA

Support several kinds of ISP protocol
　　SPI、I2C、BDM、SWD、JTAG、UART、SWIM…etc

Equipped with cable set, included ISP / ATE cable and split cable ,to strengthen the stability of ISP signal transmission.

Support a variety of file formats
　　Binary、Intel Hex、Motorola、ROM...etc

Support 1.8V low voltage IC

Provide detailed CLI(Command Line)
　　Use Opto-isolation to send the signals between parts of a circuit.

Support stand alone mode
　　StarProg-ATE allows user saving 8 projects to SD card maximum and select the project by ATE port.

Unlimited number of StarProg-ATE can be driven by 1PC

Hardware：
Table 1 ：ISP Header Pin Out (2x10) Table 2 ：ATE Header Pin Out (2x7)
1 VPROG0 VPROG0 2
3 VPROG1 VPROG1 4
5 GND GND 6
7 3.3V VREF 8
9 IO7 IO8 10
11 IO5 IO6 12
13 IO3 IO4 14
15 IO1 IO2 16
17 GPIO1 GPIO2 18
19 GPIO3 GPIO4 20
1 OPTO_GND OPTO_GND 2
3 SEL0 SEL1 4
5 SEL2 Reset 6
7 OPT_VCC OPT_VCC 8
9 OPT_Start OPT_Busy 10
11 OPT_Pass OPT_Fail 12
13 3.3V GND 14
Contents：  
  • 1 x StarProg-ATE Main Unit
  • 1 x USB Cable
  • 1 x AC Power Adaptor
  • 1 x 4G Micro SD card
  • 1 x SPI Cable set
  • 1 x ATE Cable Set
  • 1 x CD-ROM(Include Dediware software and user manual)