alix6f2 |
System board |
Status
|
Active |
Part numbers
|
alix6f2 = 2 LAN / 1 miniPCI / 1 miniPCI Express / LX800 / 256 MB / USB /
dual SIM socket |
Spec
|
CPU: 500 MHz AMD Geode LX800
DRAM: 256 MB DDR DRAM
Storage: CompactFlash socket
Power: DC jack or passive POE, min. 7V to max. 20V
Three front panel LEDs, pushbutton
Expansion: 1 miniPCI slot, 1 miniPCI Express slot (USB only), LPC bus
Connectivity: 2 Ethernet channels (Via VT6105M 10/100)
I/O: DB9 serial port, dual USB port
Board size: 6 x 6" (152.4 x 152.4 mm)
Firmware: tinyBIOS |
Customer options
|
• 44 pin IDE, I2C bus, buzzer, RTC battery |
SIM socket ?
|
By itself the SIM socket does not do anything. You need a 3G modem in the
miniPCI express socket to get connectivity. |
miniPCI Express ?
|
This is a new standard for small size radio modules, using PCI Express
and USB 2.0 connectivity. On ALIX, only USB 2.0 connectivity is supported.
Some manufacturers of radio modules:
• Ericsson
• Novatel
• Option
• Sierra Wireless
•wi-fi cards using PCI express will NOT work !
•3G Modem modules based on Qualcomm chipsets (most on the market)
don't work reliably with the AMD CS5536 USB controller unless the USB rate
is limited to 12 Mb/s !!! Please see our support forum or contact our
technical support for more detailed instructions. Some
Ericsson modules don't observe the reset signal, difficult to get a proper
reset on warm reboot. |
BIOS update note
|
Board ID has been changed, flash updater will look for alix5.bin . Latest BIOS
=
v0.99m. |
Changes from alix6e
|
• Enhance resistance to injected RF energy.
• Change chassis ground connections to enhance resistance to ESD / burst.
• Disconnect miniPCI express pins 30 and 32 (SMBDAT / SMBCLK).
• Reset controlled by USBEN2.
• Shift miniPCI connector to fit larger Wifi modules (dcma82 / dnma92). |
Manufacturer
|
PC Engines |
Origin
|
Taiwan |
Support info
|
ALIX.2 series |
Schematic
|
PDF |