apu2c2 System board
Status active
Part numbers apu2b2 = 3 i211AT LAN / AMD GX-412TC CPU / 2 GB DRAM
apu2c2 = 3 i211AT LAN / AMD GX-412TC CPU / 2 GB DRAM
apu2b4 = 3 i210AT LAN / AMD GX-412TC CPU / 4 GB DRAM with ECC
apu2c4 = 3 i210AT LAN / AMD GX-412TC CPU / 4 GB DRAM with ECC
Product status BIOS is not feature complete yet, in particular -
• No boot from SD card.
• ECC not working yet.
• iPXE module not included yet.
Changes from apu2b to apu2c: Integrate blue wire patches (EMI, power-up circuit) into PCB fab.
Use with case1d2blku / case1d2redu / case1d2bluu enclosures
ac12veur2 / ac12vus / ac12vuk AC adapter
msata16d mSATA SSD
wle200nx miniPCI express wireless module
Specification • CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
• DRAM: 2 or 4 GB DDR3-1333 DRAM
• Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector.
• 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
• Connectivity: 3 Gigabit Ethernet channels (Intel i211AT on apu2b2, i210AT on apu2b4)
• I/O: DB9 serial port, 2 USB 3.0 external + + 2 USB 2.0 internal, three front panel LEDs, pushbutton
• Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
• Board size: 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e.
• Firmware: coreboot (please contact support@pcengines.ch for source code if desired).
• Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).
Documentation user's manual
Howto HowTo collection
Cooling assembly apu cooling assembly instructions
BIOS update Update 1/20/2016: fix miniPCIe IRQ assignments, wle200nx working
Schematic apu2b / apu2c schematics
Manufacturer PC Engines
Origin Taiwan

© 2002-2016 PC Engines GmbH. All rights reserved.