case1d2bluu |
Enclosure 3 LAN USB blue |
Status
|
active |
Part numbers
|
• case1d1u = 2 LAN, 3 SMA, USB, plain anodized
• case1d1redu = 2 LAN, 3 SMA, USB, red anodized
• case1d1blku = 2 LAN, 3 SMA, USB, black anodized or painted
• case1d2u = 3 LAN, 2 SMA, USB, plain anodized
• case1d2redu = 3 LAN, 2 SMA, USB, red anodized or painted
• case1d2blku = 3 LAN, 2 SMA, USB, black anodized or painted |
Use with
|
ALIX.2 series (2 LAN / 3 LAN)
brk1d (wall mount bracket)
pigsma (SMA reverse pigtail)
pigsmaf (SMA female pigtail)
pigsmaf (MMCX SMA reverse pigtail) |
Spec
|
Enclosure designed for ALIX.2* boards. Cutouts for
3 LEDs and 1 switch in front, cutouts for DB9, 2 or 3 LAN,
3 or 2 SMA connectors, DC jack in back.
Enclosure made of anodized or painted aluminum.
Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant. |
Changes from case1c*
|
• Countersunk screws for the top cover, prethreaded base.
• More antenna holes
• Optional wall mount bracket
• Front is part of the top cover, i.e. no need to disassemble
everything to change the CF card.
• Please note that this enclosure is a bit wider and taller than
case1c* to accomodate the added antenna holes. |
Includes
|
4 screws to mount system board, 4 screws to close enclosure, 4 self-adhesive
feet, 2 or 3 rubber plugs to close unused SMA holes. |
Assembly notes
|
Tools needed: Phillips screw driver, 5 mm or 3/16" nut driver. Remove hex nuts
from DB9 connector of ALIX board. Mount ALIX board in enclosure, then fasten
all screws and hex nuts. CF card can be secured with Kapton tape to the CF
socket, or a strip of elastic rubber (e.g. sealing strip for windows) on the
inside of the top cover. |
Customization
|
Customer silk screen, custom paint colors etc. are possible for volume orders. |
Manufacturer
|
PC Engines |
Origin
|
China |
|