lpc1aapu |
Flash recovery board for apu |
Status
|
active |
Part numbers
|
lpc1a = LPC flash recovery board for ALIX / WRAP system boards.
Please specify which board you will use this with so the correct BIOS can be programmed.
lpc1aapu = LPC flash recovery board for APU1 system boards (16 Mbit flash). |
Usage (WRAP / ALIX)
|
Install the LPC.1A module on the WRAP or ALIX board. Please watch the
orientation (white stripe).
Then power on.
The LPC module will override the on-board flash, which could be blank
or corrupted. Boot FreeDOS from a CF card
and reprogram the on-board flash BIOS. Then power off and remove the
LPC module. The on-board flash should now function normally. |
Usage (APU)
|
Install the LPC.1A module on the APU board. Please watch the
orientation (white stripe).
Then power on.
The LPC module will override the on-board flash, which could be blank
or corrupted. Boot tinyCore Linux from a
SD card or USB stick, and reprogram the on-board flash BIOS. Then power
off and remove the LPC module. The on-board flash should now function normally. |
Schematic
|
lpc1a.pdf |
Manufacturer
|
PC Engines |
Origin
|
Taiwan |