wle200nx |
802.11 a/b/g/n miniPCI express radio |
Status
|
active |
Part numbers
|
wle200nx = Compex WLE200NX a/b/g/n miniPCI express radio card, I-Pex connectors |
Use with
|
apu1d or apu1d4 system board
pigsma pigtail (recommend two)
antsma 2.4 GHz antenna or
antsmadb dual band antenna (recommend two) |
Data sheet
|
Compex WLE200NX |
Chipset
|
Qualcomm Atheros AR9280. |
Connector
|
I-Pex / u.fl |
Note
|
Wireless radio cards are ESD sensitive, especially the RF switch and the
power amplifier. To avoid damage by electrostatic discharge,
the following installation procedure is recommended:
• Touch your hands and the bag containing the radio card to a ground
point on the router board (for example one of the mounting holes). This
will equalize the potential of radio card and router board.
• Install the radio card in the miniPCI express socket.
• Install the pigtail cable in the cutout of the enclosure. This will
ground the pigtail to the enclosure.
• Touch the I-PEX connector of the pigtail to the mounting hole
(discharge), then plug onto the radio card.
• Use external lightning protection for outdoor applications. |
Compliance
|
FCC & CE. Intended for professional use. |
Warranty
|
1 year. |
Manufacturer
|
Compex |
Origin
|
China |