TTL-RS485 Module - M100S48
Click to enlarge |
|
This TTL-to-RS485 converter features a 2×5-pin TTL input header and a two-pole screw terminal output port. The pinout of the input pins makes it plug-in compatible with the SBC-SAM9G45 development board's COM0-COM3 expansion headers. A ribbon cable is provided to make that connection. However, the standard 2.54mm pin pitch makes it easy to wire up to practically any development system with TTL UART headers
ADM2483 isolated RS485 transceiver
Converts TTL level logic to RS485 levels
Size: 44 × 26 mm
Board Support: SBC-SAM9G45 | NET-SAM9X25
Converts TTL level logic to RS485 levels
Size: 44 × 26 mm
Board Support: SBC-SAM9G45 | NET-SAM9X25
Input interface
TTL level input, 2×5-pin 2.54mm (0.1") pitch header.
Pin | Signal Name | Pin | Signal Name |
1 | NC | 2 | RXD |
3 | TXD | 4 | NC |
5 | GND | 6 | NC |
7 | RTS | 8 | CTS |
9 | VDD5V | 10 | VDD33(3.3V) |
Output interface
RS485 level, screw terminal connector, 3.81mm pitch.
Pin | Signal Name |
1 | RS485B |
2 |
RS485A |
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.