Categories
Brands
Information
Shopping Cart
Bestsellers
SPI-127-SOP008-150mil-01DE
 Click to enlarge |
|
|
* For SPI Flash & EEPROM (8N) |
 |
|
Adaptor manual 1. Make sure the triangle mark on the bottom left PCB board aims at the triangle mark on the DediProg devices. For more detailed insertion direction, please download the document HERE Caution: Incorrectly installed the socket adaptor may cause device and socket damage. 2. Align the Pin 1 mark on the socket with the Pin 1 of the IC. Press down the top of the socket to insert the IC. Visually check the connection between the socket and the device, if it is connected properly, then the device is ready to program. 3. We recommended using a pick up tool for handling the socket. Do not touch the PCB board directly, because dirt and statics may cause errors during device programming. 4. Please remove the adaptor from the device after finish the work. Note: There are different sizes of the socket adaptors for ProgMaster programmers. Standard type (64x34mm) is compatible with ProgMaster-U4/U8 Special type (64*54mm) only compatible with ProgMaster-U4 |
|
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.
 Versatile SPI Flash Programmer SF600 SF600 $305.00 |
 SF600 Plus SPI Flash IC Programmer SF600Plus $350.00 |
-120x120.png "NuProg-E UFS/EMMC Programmer - NuProg-E") NuProg-E UFS/EMMC Programmer - NuProg-E NuProg-E $1,295.00 |
 SPI NOR/SPI NAND Engineering Programmer SF700 SF700 $350.00 |