TTL-RS232 Module - M100S23
This TTL-to-RS232 converter features a 2×5-pin TTL input header and a DB9-M RS232 output port. The pinout of the input pins makes it plug-in compatible with the SBC-SAM9G45 development board's COM0-COM3 expansion headers (or the Bus-Serial expansion module's J3-J6 headers). A ribbon cable is provided to make that connection. However, the standard 2.54mm pitch of the header pins makes it easy to wire up to practically any development system with TTL UART headers
MAX3232ESE+ RS232 transceiver
Converting TTL level logic to RS232 levels
Support 5-wire(RX, TX,RTS,CTS) serial port
Data rates up to 120kbps
Board Support: SBC-SAM9G45 | NET-SAM9X25.
Support 5-wire(RX, TX,RTS,CTS) serial port
Data rates up to 120kbps
Board Support: SBC-SAM9G45 | NET-SAM9X25.
Input interface
TTL level input, 2×5-pin 2.54mm (0.1") pitch header. The pinout is printed on the PCB for easy reference.
Pin | Signal Name | Pin | Signal Name |
1 | NC | 2 | RXD |
3 | TXD | 4 | NC |
5 | GND | 6 | NC |
7 | RTS | 8 | CTS |
9 | NC | 10 | VDD33(3.3V) |
Output interface
RS232 level, DB9 Male connector. The table below mimicks the orientation of the connector on its side.
Pin | Signal Name | Pin | Signal Name |
1 | NC | 2 | RXD1R |
3 | TXD1R | 4 | NC |
5 | GND | 6 | NC |
7 | RTS1R | 8 | CTS1R |
9 | NC |
|
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.