SDIO SDCARD Module - M100SD1
Click to enlarge |
|
This SDIO-SDCARD module features a 2×5-pin SDIO input header. The pinout of the input pins makes it plug-in compatible with the SBC-SAM9G45 development board's SDIO J4 header.
Convert SDIO into an SD Card slot
Supports backup battery
Size: 45 × 26 mm
Input Interface
SDIO interface, 2×5-pin 2.54mm (0.1") pitch header.
Pin | Signal Name | Pin | Signal Name |
1 | DAT2 | 2 | DAT3 |
3 | DCMD | 4 | CLK |
5 | DAT0 | 6 | DAT1 |
7 | SW1 | 8 | SW2 |
9 | GND | 10 | VDD33(3.3V) |
Output Interface
SD Card slot.
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.