Logic Analyzer 9-Channels, 100MHz - ScanaPLUS
ScanaPLUS is a robust, versatile and multi-application 9 Channels logic analyzer. It relies on the free ScanaStudio software to capture and analyze logic signals.
This logic analyzer will capture signals at a steady rate of 100 MSPS (Million Samples Per Seconds), whether you’re using 1 or all 9 channels. No compromises.
Thanks to its configurable and fully protected input stage, ScanaPLUS can be directly connected to RS232, to CAN or RS485 differential lines, or to tiny 1.2V logic signals!
Plus, a logic analyzer with 9 channels, will allow you to work with 8-bit buses, having a 9th channel left for a synchronization signal.
Worry no more about maximum capture time or transfer speed from device to computer. ScanaPLUS relies on a proprietary FPGA based compression and streaming algorithm, that will capture signals for as long as your computer can take!
Basic information
- 100 MSPS (Million samples per second).
- Accuracy: ± 10 ns
- Maximum capture time: 1000 seconds *
- Number of channels: 9.
- Dimensions: 73 x 46 x 17 mm (2.87 x 1.81 x 0.67 inches)
- Weight: 59 gm (2.08 oz)
*(Maximum capture time of 1000 seconds is only limited by software capabilities, it may be increased via future software updates)
Input features and characteristics
- Number of adjustable logic threshold groups: 2
- Adjustable logic levels for each group: 1.2V, 1.5V, 1.8V, 2.8V, 3.3V to 5V
- Number of integrated receivers for RS232 bus: 5
- Number of integrated receivers for LIN bus: 5
- Number of integrated differential lines receivers: 2 (can used for CAN, RS485, etc.)
- Activity LED integrated to ScanaPLUS device quickly indicates logic change on any line
- Input operating range ± 35V
- Absolute maximum input range ± 50V
- Input impedance 100KΩ || 5pF
Sophisticated Trigger options
- Configurable trigger event types: Rising edge, Falling edge, Logic level, Pulse width
- Multi-channel trigger support: Yes
- Number of cascaded events to trigger: Unlimited number of events
Software characteristics summary
- Compatible with ScanaStudio V2.0 and above. (Multi-workspace, features rich environment used for device configuration, signal visualization and protocol decoding)
- Supported protocols (regularly updated) UART, SPI, I2C, 1-wire, CAN, LIN 1.x & LIN2.x
- Custom protocol decoder writing feature.
- Export printer friendly images Yes. Perfectly adapted to report writing
-
Compatible Operating systems:
- Windows: Windows XP, Vista, and 7 (32 or 64 bit)
- Linux: Recent Ubuntu (32 or 64 bit)
- Minimum system requirements USB 2.0 Port, 512MBytes of RAM
Download full specifications sheet
We’ve selected the finest hook probes for you.
Integrated CAN, LIN, RS232 and RS485 receivers!
ScanaPLUS adapts to your logic signals levels.
ScanaPLUS will allow you to capture logic transition whose logic levels are as low as 1.2v and all the way up to 5V logic levels. While configuring the exact threshold voltage is not critical for most application, it will give you much better accuracy when measuring high frequency signals (above 1MHz).
Do you need to capture 1.8 v signals on some pins, while capturing 5V signals on others? No problem, with ScanaPLUS you can define 2 different logic thresholds for two groups of inputs!
Activity indicator LED
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: