Freescale(NXP) i.MX6 single board computer/development board - i.MX6DL
- Name: Freescale(NXP) i.MX6 single board computer/development board(FL- i.MX6DL)
- Model: i.MX6DL
- CPU: i.MX6Dual Lite
- Architecture: Cortex-A9
- RAM: 1G DDR3 1600
- Flash: 8GB eMMC
- Main Frequency: 1GHz
- OS: Android, Linux
Hardware
i.MX6 CPU Module |
|||
CPU |
Freescale i.MX6Q/DL processor |
I2C |
3-ch |
Architecture |
Cortex-A9 |
SPI |
2-ch |
Main Frequency |
1GHz |
CAN |
1×CAN |
RAM |
1GB DDR3 1600 |
USB HOST |
1×USB2.0 |
FLASH |
8GB eMMC |
USB DEVICE |
1×OTG2.0 |
Input voltage |
4.2V |
SD/MMC/SDIO |
2×SD/MMC |
2D/3D |
Support |
Ethernet |
1-ch Gb Ethernet port |
Audio |
IIS interface |
MiniPCIE |
1-ch |
PMU |
MMPF0100NPEP |
UART/IrDA |
5-ch(1 debug port is included) |
Size |
60mm*60mm |
EINT/GPIO |
support |
Connection Method |
Stamp holes |
Video Codec |
Hardware codec |
OS |
Android4.4/Linux3.0.35/Ubuntu12.04 |
HDMI |
1-ch |
LCD |
RGB24bit(2-ch 8bit LVDS interface) |
Camera |
1×5MP parallel camera |
Graphic controller |
Vivante GC355/VIVANTE GC320 |
SATA |
1(SATA-II)(Only support quad core processor now) |
i.MX6 Base board |
|||
Audio |
3-ch(1-ch phone,1-ch MIC,1-ch speaker) |
User key |
3 |
I2C |
2-ch |
Boot switch |
Set to boot from Nandflash or SD card |
SPI |
1-ch |
Reset |
1 |
CAN |
1-ch |
PWM |
1-ch(For LCD backlight) |
RS485 |
1-ch (With isolation protection ) |
LCD |
1-ch,support 7-inch capacitive LCD |
Camera |
1-ch,5MP parallel camera, OV5640 |
EINT |
support |
SD/MMC/SDIO |
2-ch,(1-ch SD/MMC card slot) |
GPIO |
support |
USB HOST |
1-ch, support USB 2.0 protocol |
LVDS |
2-ch |
USB DEVICE |
1-ch, support USB 2.0 protocol |
HDMI |
1-ch |
Ethernet |
1-ch gigabit Ethernet interface, RG45 connector |
lithium battery |
Support 2 lithium/polymer batteries. |
Serial |
|