We have refreshed our website please go to our new secure location

MYD-C7Z015 Development Board - MYD-C7Z015
Brands
 
Shopping Cart
0 items
 

MYD-C7Z015 Development Board - MYD-C7Z015

MYD-C7Z015 Development Board - MYD-C7Z015
Click to enlarge
Price: $369.00
Availability: 2 - 3 Days
Model: MYD-C7Z015
Average Rating: Not Rated

 

MYD-C7Z015 Development Board

- MYC-C7Z015 CPU Module as Controller Board 
- 667MHz Xilinx XC7Z015 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic 
- 1GB DDR3 SDRAM (2 x 512MB, 32-bit)
- 4GB eMMC, 32MB QSPI Flash 
- 4 x USB2.0 Host, Gigabit Ethernet, CAN, HDMI, LCD, TF 
- 1 x XADC, 3 x PMoD, 1 x FMC, 1 x SFP, 1 x PCIe 
- Optional 4.3 or 7 inch LCD/TSP 
- Ready-to-Run Linux 3.15.0

 

Description


The MYD-C7Z015 development board is a programmable, low-cost and high-performance board designed by MYIR. It integrates Xilinx XC7Z015 (Z-7015) Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic from Xilinx Zynq-7000 family, with one PCIe interface and one SFP transceiver module interface on the base board to allow users to expand numerous of high-speed devices. It’s typically applications ranges from Industrial Automation, Test & measurement, Medical Equipment, Aerospace to military and more others.

 


The MYD-C7Z015 development board is using the MYC-C7Z015 CPU Module as the core controller board which integrates the core components including the Zynq-7015 processor, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog. The MYC-C7Z015 CPU Module is mounted on to the MYD-C7Z015 base board through two 0.8mm pitch 140-pin Board-to-Board connectors. Compared with the Zynq-7010, the processor Zynq-7015, has more logic cells, Block RAM and DSP slices, which makes the board obtain more powerful programmable function for users.


 

The MYD-C7Z015 development board is using the same base board with MYD-C7Z010/20 development board and takes full features of the Zynq-7015 SoC to create a rich set of peripherals to the base board through headers and connectors including one RS232 serial port, four USB Host ports, one Gigabit Ethernet port, CAN, HDMI, LCD/Touch screen, TF card slot, RTC, one XADC header to allow you take advantage of Xilinx XADC, three PMoD headers to meet your I/O needs with PMoDs and one low-pin count FMC connector to allow various FMC cards for custom I/O options. Especially, it has one SFP transceiver module to keep higher transmission speed and better stability during your evaluation, as well as one PCIe interface, which contributes the data transmission speed to a high frequency when customers using the board.


The MYD-C7Z015 development board is preloaded with Linux and delivered with necessary cable accessories. It is a high-performance and low-cost development platform for evaluation and prototype based on Xilinx Zynq-7000 All Programmable SoC family.

 




MYD-C7Z015 Development Board


 

Features

 

Mechanical Parameters

  • Dimensions: 190mm x 110mm (base board), 75mm x 55mm (CPU Module)
  • PCB layers: 4-layer design (base board), 12-layer design (CPU Module)
  • Power supply: 12V/0.5A (base board), 5V/0.5A (CPU Module)
  • Working temp.: 0~70 Celsius (commercial grade)

OS Support

  • Linux 3.15.0

The MYD-C7Z015 Controller Board (MYC-C7Z015 CPU Module)

        

MYC-C7Z015 Top-view                                                               MYC-C7Z015 Bottom-view

SoC

  • Xilinx XC7Z015-1CLG485C (Zynq-7015)
    - 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)
    - Integrated Artix-7 class FPGA subsystem with 74K logic cells, 46,200 LUTs, 160 DSP slices (for XC7Z015)
    - NEON™ & Single / Double Precision Floating Point for each processor
    - Supports a Variety of Static and Dynamic Memory Interfaces
    - Four high-speed SerDes transceivers up to 6.25Gbps 
    - Four PCIe Gen2 hardened, integrated IP blocks

Memory

 

  • 1GB DDR3
  • 4GB eMMC
  • 32MB QSPI Flash (16MB is optional)

 

Peripherals and Signals Routed to Pins ( MYC-C7Z015 pin-out description)

  • One 10/100/1000M Ethernet PHY with SGMII
  • One USB 2.0 ULPI PHY
  • External watchdog
  • Three LEDs
    - One blue LED for power indicator
    - One red LED for FPGA program done indicator
    - One green user LED
  • Two 0.8mm pitch 140-pin board-to-board expansion connectors bring out below signals:
    - One Gigabit Ethernet (PS Ethernet 0)
    - One USB OTG 2.0 (PS USB 0)
    - Two Serial ports (reused from PS_MIO, can also be implemented through PL pins)
    - Two I2C (reused from PS_MIO, can also be implemented through PL pins)
    - Two CAN BUS (reused from PS_MIO, can also be implemented through PL pins)
    - One SPI (reused from PS_MIO, can also be implemented through PL pins)
    - ADC (one independent differential ADC, 16-channel ADC brought out through PL pins)
    - One SDIO (PS SDIO 0)
    - Bank 13 (PL I/O configurable as up to 18 LVDS pairs and 1 single-ended I/O or 37 single-ended I/O)
    - Bank 34 (PL I/O configurable as up to 24 LVDS pairs and 2 single-ended I/O or 50 single-ended I/O)
    - Bank 35 (PL I/O configurable as up to 24 LVDS pairs and 2 single-ended I/O or 50 single-ended I/O)
    - Bank 112 (4 GTP serial transceivers, 2 reference clock input)

 

The MYD-C7Z015 Base Board (MYB-C7Z015)

MYD-C7Z015 Base Board (MYB-C7Z015)

PS Unit

  • Four USB 2.0 Host ports (through USB Hub)
  • One RS232 (DB9 port)
  • One TF card slot (bootable)
  • One CAN interface
  • One 10/100/1000M Ethernet
  • One 2.54mm pitch 14-pin JTAG interface (PS, PL reused)
  • Battery backed RTC
  • One User Button (One I2C, can be connected to LCD and Resistive Touch Screen)
  • Jumpers
  • - One for booting selection from TF card or QSPI- One for JTAG selection for using PS and PL reused or independent JTAG configured through PL pins- One for selection if adding FMC module to JTAG

 

PL Unit

 

  • One XADC interface
  • One Xilinx standard LPFMC interface
  • One HDMI interface (16-bit YCrCb, support 1080p display, do not support audio)
  • LCD/Touch screen interface (16-bit RGB, signals reused with HDMI, supports resistive and capacitive touch screen)
  • Two LEDs (one for FMC module detection, one for power indicator)
  • Three-channel PMoD
  • One SFP transceiver module with RJ45 interface(SFP-GE-T module, up to 1000Mbps)
  • One PCIe interface
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

MYD-C7Z015 Development Board - MYD-C7Z015
Click to enlarge
MYD-C7Z015 Development Board - MYD-C7Z015
Click to enlarge