Indoor enclosure for alix.3 box2c
Click to enlarge |
|
Part numbers | box2c = 1 LAN enclosure, RoHS compliant |
Use with |
alix3* series brk3c1 bracket for alix3c1 / no opening brk3c2 bracket for alix3c2 / with USB opening brk3c3 bracket for alix3c3 / with USB and VGA / audio openings pigsma (SMA reverse pigtail) antsma (SMA reverse antenna) pigsmaf (SMA female pigtail) |
Spec | Aluminum Enclosure designed for WRAP.2* / ALIX.3* boards. Cutouts for 1 LAN, DC jack, 2 SMA, DB9, 3 LEDs in back. |
Dimensions | 113 x 163 x 30 mm |
Includes | Aluminum extrusion, 1.5mm Al back plate, 4 screws, rubber feet, rubber plugs for unused SMA holes. Antenna / pigtails / WRAP board shown are not included ! Please order front bracket (brk3c1 / brk3c2 / brk3c3) separately. |
Assembly notes | Tools needed: Phillips screw driver, 5 mm or 3/16" nut driver. Remove hex nuts from DB9 connector of WRAP board. Mount back plate to WRAP board, replace hex nuts. Slide WRAP board into the enclosure, fasten the back plate using 4 screws. Tip for reinserting self-cutting and plastic screws: To find the start of the existing thread, turn screw counterclockwise first until you feel the start. |
Customization | Customer silk screen, paint / anodizing, cutouts etc. are possible for volume orders. |
Manufacturer | PC Engines |
Origin | China |
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: