Tiny210V2-S5PV210 Features

1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine

512MB DDR2 RAM and 2GB NAND Flash

LCD/Touch Screen, HDMI, TV out, Audio support

SDIO, USB Host/OTG support

Ethernet, WiFi, serial port, G-Sensor, GPIO

Contains CPU board and motherboard

Linux 2.6.35 & Android 2.3 Android 4.0 and WinCE 6.0 support 

   Overview   Picture   Dimension  

 The Tiny210V2SDK is a high-performance design based on the Samsung S5PV210 ARM Cortex-A8 microcontroller with 512MByte DDR2 RAM, 2GByte Nand Flash, RTC, Audio and Ethernet capability. The system consists of a motherboard with the CM-Tiny210V2 CPU module plugged into it, and an LCD touchscreen module mounted (three sizes available). The motherboard has integrated RS232, USB, Ethernet, Audio In/Out, Keyboard, LCD, HDMI, TV out, camera in, SDIO WiFi Module (pins only), SD card, G-Sensor and more other functions on board.

A complete software development package is included. The board supports Linux 2.6.35 Android 4.0 and Android 2.3 operating system and is provided with complete basic drivers.  

Hardware

1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine

512MB DDR2 RAM, 32-bit data bus, 200 MHz

MLC NAND Flash: 2GB

Two 60-pin and two 30-pin 2.0mm spaced DIP connectors for mounting to motherboard

Ethernet Chip: DM9000AEP

Audio Codec Chip: WM8960

Four user LEDs (green)

Supply voltage from 2V to 6V

CPU module dimensions: 74x 55 x 11mm

Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

We provide the Tiny210V2SDK mother board(new version: Tiny210V2 SDK 1301) for CM-Tiny210V2 CPU board.

 

1. Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level

2. keys: 8 key

3. RJ45 Ethernet port: using DM9000AEP(On CPU board), 10/100M adaptive

4. Audio input and output: using the WM8960 professional audio chip(On cpu board), containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output

5. USB Slave: 1 Road, the USB 2.0 specification

6. USB Host: 1 USB Host Interface

7. Buzzer: 1, control by the PWM0

8. EEPROM: AT24C08 (256 Byte) for I2C test

9. LCD Interface: 2 LCD interface, support 3.5 "-19" full color TFT display LCD

10. Capacitive touch screen: I2C-based interface, on the 45Pin LCD connector

11. Resistive touch screen: 1-wired Touchscreen interface, On 40Pin LCD connector

12. SDIO interface: used to connect the SD WiFi module and other

13. CMOS Camera interface: used to connect CMOS camera

14. RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)

15. MIPI-DSI interface

16. Gravity sensor Support

17. PCB layer: 2

18. PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module

19. Power supply: DC-5V

 Software

The board ships with Linux 2.6.28 BSP, WinCE BSP, and Android 2.3 Android 4.0 source code.

Android

Bootloader

Version: Superboot-210

Function: Supports boot and system update by microSD/TF-card (Superboot)

 

Linux kernel

Linux-2.6.35 For Android 2.3

Linux-3.0.8 for Android 4.0 

Compile: arm-linux-gcc-4.5.1-v6-vfp

 

Android system

Android 2.3 (source code)

Android 4.0 (source code)

 

Device Driver

TFT LCD/Touchscreen, HDMI, Audio Out, MMC/SD card, Net, Serial port, Watchdog, RTC, Keyboard

WiFi, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driver

 

File System support

Ubi filesystem, yaffs, ext2/3

 

Function use examples

Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI support

CMOS Camera support, 3G support (WCDMA, CDMA2000)

USB Disk support, USB Bluetooth support, Switch horizontal and vertical screen

Dynamic Wallpapers

Linux

Bootloader

Version: Superboot-210

Function: Support boot and system update via microSD/TF-card (Superboot)

 

Linux kernel

Verison: Linux-2.6.35

Compile: arm-linux-gcc-4.5.1-v6-vfp

 

Device Driver

TFT LCD/Touchscreen, HDMI, Audio Out, MMC/SD card, Net, Serial port, Watchdog, RTC, Keyboard

WiFi, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driver

 

File System support

Ubi filesystem, yaffs, ext2/3

 

Graphics system

Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

WinCE 6.0

Bootloader

Version: Stepldr and EBOOT (source code provided)

Function: Supports download and system update via SD and USB-Quickboot

 

WinCE NK

Version: WinCE 6.0 R3

Function: HIVE register support, BINFS support, SLEEP

 

Device Drivers

TFT LCD/Touchscreen (supports 3.5", 4.3", 7.0", 8.0", 10.4" LCD)

CMOS camera, user key driver, PWM driver, RTC driver, DM9000 driver

SD card support, touch screen support, audio in/out

Serial driver, media support (JPEG, FIMC, MFC, 2D/3D, TVENC,TVSCALER)

WiFi, GPS, GPRS, Camera

USB Bluetooth, USB WiFi, USB mouse, USB key, IE6 explorer

 

Test programs

LED test, button test, serial debug tools, PWM test, TV test, OpenGL test

CMOS camera test, SD WiFi test, USB WiFi test, backlight control test, USB Bluetooth test, Ethernet test

 

Different between Tiny210V2SDK, Tiny210SDK1

 Different in Tiny210/Tiny210V2

Download

Overview_Tiny210.pdf   

Getting start for Tiny210.pdf

Tiny210 User manual.pdf

 

Product package include:

One Tiny210V2SDK Board Contain Tiny210V2 CPU Board One net cable One Serial cable One USB cable One 5V@2A Power adapter DVD for source code