In-Situ ROM Programmer for Serial Flash model SF100

Click to enlarge

Price:	$230.00
Availability:	In Stock
Model:	SF100
Manufacturer:	Dediprog
Average Rating:	Not Rated

Description Additional Images (1) Reviews (0) Related Products (30)

Description :

The SF100 is a high speed “In System Programming” programmer to update the SPI Flash soldered on board or Freescale MCU using Ezport. The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users.

The SF100 USB software tool chain offers high flexibility and fit the different and highest requirements:

- Engineering Graphic User Interface: for engineers and expert to access advanced features for development, repairing etc.

- Production Graphic User Interface: for operators in production to control multiple programmers and improve the throughput.

- Command line interface: Customer software can control the multi SF100 programmers (SF100 integration, Control SF100 with Production In Circuit Tester..)

Features :

Update Serial Flash soldered on board with application powered or not
Update the internal Flash of Freescale MCU using the Ezport (MCF5223, MCF5221, MCF5213) or the external SPI Flash of Freescale MCU using the SBF interface (MCF5445, MCF5227)
Control Application, controller reset and MOSFET isolation status
Capable of handling two serial flash memories;(new feature; provided in SF100 with serial number DP001325, firmware 2.0.4, software 2.0.37 and after)
USB Interface
Start button feature
Signal conflict protections
Multi-Programmers Capability
Support Windows 2003 and above
Support both 32 bit or 64 bit OS

High performance(tested and measured with software version 2.0.37.2 and from a single source of serial flash memory supplier):

USB Mode
Density	8Mb	16Mb	32Mb	64Mb	128Mb
Program	7.28s	13.09s	28.01s	52.4s	74.01s
Verify	2.57s	4.64s	8.08s	17.09s	33.78s
Auto(Program+Verify)	8s	14s	37s	70s	108s

Hardware :

SF100 is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status.Please refer to Table 1 for the SF100 2x7 header pin out.

DediProg also provides the SF100 ISP Cable which is used to connect the SF100 programmer to the 2X4 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF100 ISP Cable 2x4 pin out.

Table 1: SF100 ISP Header Pin Out (2x7)

1	I/O1	I/O4	2
3	I/O2 or CS2	NC	4
5	Vcc	GND	6
7	CS	CLK	8
9	MISO	MOSI	10
11	Vpp/Acc	I/O3	12
13	SCL	SDA	14

Table 2: ISP Cable Connector Pin Out (2x4)

1	Vcc	GND	2
3	CS	CLK	4
5	MISO	MOSI	6
7	Vpp/Acc	I/O3	8

Contents :

1x USB cable
1x SF100 Programmer
1x ISP cable
1x SF100 Universal Adaptor
CDROM with Software, specifications and user manual

Hardware Requirement for ISP :

To have a clear understanding on the different ISP or backup boot methods and different reference schematics, please download our dedicated application notes: AN0103 and AN0106 in the documentation section

Option Purchase :

Backup Boot Flash-SO8N
Backup Boot Flash-Dual SO8N
Backup Boot Flash-SO8W
Backup Boot Flash-Dual SO8W
Backup Boot Flash-SO16W
Backup Boot Flash-Dual SO16W
BBF SO8 Testclip
BBF SO8 Testclip-Dual
BBF SO16W Testclip
ISP SO8 Testclip
ISP SO16W Testclip
SF100 Universal Adaptor

Write Review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue

Click to enlarge

Versatile SPI Flash Programmer SF600 SF600 $285.00	SPI Flash Development Kit SFDK01 SFDK01 $830.00	ISP Evaluation Kit ISP-Eval-01 ISP-Eval-01 $255.00	Intel ISP Adaptor A (mated with SF100) ISP-ADP-intel-A ISP-ADP-intel-A $8.00
ISP Cable Adaptor (1.27mm) ISP-ADP-127 ISP-ADP-127 $12.00	SF100 ISP cable 2x5 ISP-CB2 ISP-CB2 $7.00	10-Pin ISP Split Cable (2.54mm) ISP-SP-CB ISP-SP-CB $25.00	10-Pin ISP Split Cable (2.00mm) ISP-SP-CB2 ISP-SP-CB2 $25.00
SF100 Universal Adaptor ISP-UADP-127/254 ISP-UADP-127/254 $10.00	SPI Flash Socket 16 Pin G6179-07000001 - SOK-SPI-16W SOK-SPI-16W $3.00	SPI Flash Socket 8 Pin G6179-100000 - SOK-SPI-8W SOK-SPI-8W $2.50	ISP Testclip for SO16W 300mil ISP-TC-16 ISP-TC-16 $55.00
ISP Testclip for SO8 ISP-TC-8 ISP-TC-8 $50.00	SF100 ISP cable ISP1-CB ISP1-CB $6.00	EEPROM programmer EE100 EE100 $145.00	Backup Boot Flash kit-SO8W(207mil) Socket - SBK01 SBK01 $375.00
Backup Boot Flash kit-SO8N(150mil) Socket - SBK09 SBK09 $375.00	Backup Boot Flash Kit -SO16W(300mil) Socket - SBK03 SBK03 $375.00	Backup Boot Flash Kit -Dual SO8N(150mil) Sockets - SBK11 SBK11 $435.00	Backup Boot Flash Kit -Dual SO8W(207mil) Sockets - SBK05 SBK05 $435.00
Backup Boot Flash kit-Dual SO16W(300mil) Sockets - SBK07 SBK07 $435.00	ISP Testclip SO8 for EE100 EE-TC-8 EE-TC-8 $50.00	Universal Adaptor with SF100 2.54mm 2x4 ISP cable for SF600 - ADP-SF600-TO-SF100&CB ADP-SF600-TO-SF100&CB $10.00	2.54mm 2x10 to 1.27mm 2x10 Adaptor for SF600 - ADP-SF600-254-TO-127&CB ADP-SF600-254-TO-127&CB $12.00
BBF Testclip SO16W 300mil BBF-TC-16 BBF-TC-16 $55.00	SF600 Stand Alone Kit SF600-SAK SF600-SAK $465.00	BBF Testclip SO8 BBF-TC-8 BBF-TC-8 $50.00	SO8 Testclip - TC-8 TC-8 $30.00
SPI Flash Development Kit SFDK02 SFDK02 $880.00	TTL-RS232 Module - M100S23 M100S23 $15.00

	SPI Flash Socket 8 Pin G6179-100000 - SOK-SPI-8W $2.50
	Intel ISP Adaptor A (mated with SF100) ISP-ADP-intel-A $8.00
	In-Situ ROM Programmer for Serial Flash model SF100 $230.00
	SPI Flash Socket 16 Pin G6179-07000001 - SOK-SPI-16W $3.00
	System board alix2d13 $137.00
	AC to DC Wall Switching Adaptor 12VDC 2A for alix ADC12B $15.00
	Versatile SPI Flash Programmer SF600 $285.00
	Intel ISP Adaptor-B (mated with SF600) ISP-ADP-intel-B $8.00
	Enclosure 3 LAN USB black for alix2 case1d2blku $16.00
	SF100 ISP cable 2x5 ISP-CB2 $7.00