The MYC-C7Z010/007S CPU Module is an industrial-grade System-on-Module (SoM) based on Xilinx Zynq-7000 family SoC available for either the XC7Z010 or XC7Z007S version. It has integrated the Zynq-7010 or Zynq-7007S device, 512MB DDR3 SDRAM, 4GB eMMC, 16MB quad SPI Flash, a Gigabit Ethernet PHY and external watchdog on board and provides 1.27mm 180-pin stamp-hole (Castellated-Hole) expansion interface to allow a large number of I/O signals for ARM peripherals and FPGA I/Os to be extended to your base board. The module is ready to run Linux and supports wide working temperature ranging from -40 to +85 Celsius which is ideal for industrial embedded applications.

MYC-Y7Z010/007S CPU Module

MYIR provides a development board MYD-Y7Z010/007S for evaluating the MYC-Y7Z010/007S CPU Module, which employs the MYC-Y7Z010/007S as the controller board by populating the CPU Module on its base board through 1.27mm pitch 180-pin stamp-hole (Castellated-Hole) interface. The base board has extended a rich set of peripheral interfaces including serial ports, USB Host port, three Gigabit Ethernet ports, CAN, TF card slot, JTAG, etc. One 2.54mm pitch 2 x 25-pin expansion headeris on the base board to let more GPIOs available for further extension. MYIR offers an optional MYD-7Z010/007S IO CAPE to connect to this expansion header to extend many peripherals and signals like HDMI, LCD, camera and Pmod to help user explore more functions. The 4.3- and 7-inch LCD Modules as well as MY-CAM011B camera module from MYIR can be supported through the IO Cape. Optional USB WiFi and Camera modules are also provided which supply user a complete evaluation platform for Zynq-7000.

MYD-Y7Z010/007S Development Board

Features

Mechanical Parameters

• Dimensions: 75mm x 50mm (10-layer PCB design)
• Power supply: 5V
• Working temp.: -40~85 Celsius (industrial grade)

SoC

• Xilinx XC7Z007S-1CLG400I (Zynq-7007S) or XC7Z010-1CLG400I (Zynq-7010) 

   
  - Integrated Artix-7 class FPGA subsystem

  with 23K logic cells, 14,400 LUTs, 66DSP slices (for XC7Z007S)

  with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)  

  - NEON™ & Single / Double Precision Floating Point for each processor

  - Supports a Variety of Static and Dynamic Memory Interfaces

Memory

• 512B DDR3 SDRAM (256MB*2)
• 4GB eMMC
• 16MB QSPI Flash

Peripherals and Signals Routed to Pins

• 10/100/1000M Ethernet PHY
• External watchdog
• Three LEDs
  - One red LED for power indicator
  - One green LED for FPGA program done indicator
  - One flashing green LED for system indicator 
• 1.27mm pitch 180-pin Stamp Hole Expansion Interface brings out below signals:
  - One Gigabit Ethernet
  - One USB
  - Two Serial ports 
  - Two I2C
  - Two CAN BUS
  - Two SPI
  * Serial ports, I2C, CAN and SPI signals in PS part can be implemented through PL pins via Emio.
  - Two ADC (16-channel ADC brought out through PL pins)
  - One SDIO

OS Support

• Linux 3.15.0

Hardware Features

The Zynq®-7000 All Programmable SoC (AP SoC) family integrates the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, enabling key analytics and hardware acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device. Consisting of single-core Zynq-7000S and dual-core Zynq-7000 devices, the Zynq-7000 family is the best price to performance-per-watt, fully scalable SoC platform for your unique application requirements.

Zynq-7000S devices feature a single-core ARM Cortex™-A9 processor mated with 28nm Artix®-7 based programmable logic, representing the lowest cost entry point to the scalable Zynq-7000 platform. It includes Zynq Z-7007S, Z-7012S and Z-7014S which target smaller embedded designs. Available with 6.25Gb/s transceivers and outfitted with commonly used hardened peripherals, the Zynq-7000S delivers cost-optimized system integration ideal for industrial IoT applications such as motor control and embedded vision. 

Zynq Z-7000S SoC Device Block Diagram

Zynq-7000 devices are equipped with dual-core ARM Cortex-A9 processors integrated with 28nm Artix-7 or Kintex®-7 based programmable logic for excellent performance-per-watt and maximum design flexibility. With up to 6.6M logic cells and offered with transceivers ranging from 6.25Gb/s to 12.5Gb/s, Zynq-7000 devices enable highly differentiated designs for a wide range of embedded applications including multi-camera drivers assistance systems and 4K2K Ultra-HDTV.

Zynq Z-7000 SoC Device Block Diagram

            Zynq Z-7000 and Z-7000S SoC Device Table   

MYC-Y7Z010/007S Function Block Diagram

MYC-Y7Z010/007S Dimension Chart