| apu1d4 | System board |
| Status | active |
| Part numbers |
apu1d = 3 LAN / 2 GB DRAM / T40E CPU
apu1d4 = 3 LAN / 4 GB DRAM / T40E CPU |
| apu1d Revision notes |
• No stuff J12 SPI header to allow easier 2.5" SSD installation.
• Change bias supply for U7 VMEM / VTT regulator to V5A to fix suspend/resume support. • Add CE, FCC symbols. |
| Use with |
case1d2blku /
case1d2redu /
case1d2bluu enclosures
ac12veur2 / ac12vus AC adapter msata16d mSATA SSD wle200nx miniPCI express wireless module |
| Spec |
• CPU: AMD G series T40E, 1 GHz dual Bobcat core with 64 bit support, 32K
data + 32K instruction + 512K L2 cache per core
• DRAM: 2 or 4 GB DDR3-1066 DRAM • Storage: Boot from SD card (connected through USB), external USB or m-SATA SSD. 1 SATA + power connector. • 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive • Connectivity: 3 Gigabit Ethernet channels (Realtek RTL8111E) • I/O: DB9 serial port, 2 USB external + 2 internal, three front panel LEDs, pushbutton • Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD) • Board size: 6 x 6" (152.4 x 152.4 mm) - same as ALIX.2D13 and WRAP.1E • Firmware: coreboot (please contact support@pcengines.ch for source code if desired). • Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included). |
| Documentation | apu1.pdf |
| Howto | HowTo collection |
| Cooling assembly | apu cooling assembly instructions |
| BIOS update |
Build 9/8/2014 (beta, reduced "spew level")
Build 7/8/2014 (beta) Build 4/5/2014 (current production) Build 4/1/2014 (beta) Flash update can be done using flashrom, see our TinyCore Linux installer for easiest installation. |
| Schematic | PDF (1C) PDF (1D) |
| Manufacturer | PC Engines |
| Origin | Taiwan |
