apu1d |
System board |
Status
|
active, recommend apu2 series for new designs |
Models
|
apu1d = 3 LAN, 2 GB DRAM, T40E CPU
apu1d4 = 3 LAN, 4 GB DRAM, T40E CPU
apu1c = 3 LAN, 2 GB DRAM, T40E CPU (EOL)
apu1c4 = 3 LAN, 4 GB DRAM, T40E CPU (EOL) |
Use with
|
case1d2blku /
case1d2redu /
case1d2bluu enclosures
ac12veur3 /
ac12vuk /
ac12vus2 AC adapter
msata16e mSATA SSD
wle200nx /
wle600vx
miniPCI express wireless module |
Spec
|
- CPU: AMD G series T40E, 1 GHz dual Bobcat core with 64 bit support,
32K data + 32K instruction + 512K L2 cache per core
- DRAM: 2 or 4 GB DDR3-1066 DRAM
- Storage: Boot from SD card (connected through USB), external USB or
mSATA SSD. 1 SATA + power connector.
- 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center
positive
- Connectivity: 3 Gigabit Ethernet channels (Realtek RTL8111E)
- I/O: DB9 serial port, 2 USB external + 2 internal, three front panel
LEDs, pushbutton
- Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO
header, I2C bus, COM2 (3.3V RXD / TXD)
- Board size: 6 x 6" (152.4 x 152.4 mm) - same as ALIX.2D13 and
WRAP.1E
- Firmware: coreboot
(please contact support@pcengines.ch for source code if desired).
- Cooling: Conductive cooling from the CPU and south bridge to the
enclosure using a 3 mm alu heat spreader (included).
|
Documentation
|
apu1.pdf |
Howto
|
HowTo collection |
Cooling assembly
|
apu cooling assembly instructions |
BIOS update
|
Build 9/8/2014 (beta, reduced "spew level")
Build 7/8/2014 (beta)
Build 4/5/2014 (current production)
Build 4/1/2014 (beta)
Flash update can be done using flashrom, see our
TinyCore Linux installer for easiest installation. |
apu1d Revision notes
|
- No stuff J12 SPI header to allow easier 2.5" SSD installation.
- Change bias supply for U7 VMEM / VTT regulator to V5A to fix suspend
/resume support.
- Add CE, FCC symbols.
|
Schematic
|
PDF (1C) /
PDF (1D) |
© 2002-2018 PC Engines GmbH. All rights reserved
. |