• YoctoHub-Wireless-n

The YoctoHub-Wireless-n is a wireless-enabled module which can host three Yoctopuce modules to access them remotely through a WiFi network (802.11g). It can be powered either by a Micro-B USB cable and a regular phone charger, or a 5V battery pack.

You can use the YoctoHub-Wireless-n in the same way as a VirtualHub running on a little computer, but it is much easier to setup and maintain than a computer. It is smaller and consumes less. It is compatible out-of-the-box with all existing applications using Yoctopuce API. As for the VirtualHub, it can run autonomously using HTTP callbacks. The YoctoHub-Wireless-n can connect to a 802.11b/g/n wireless access point in infrastructure mode, but it can also work as a software access point (SoftAP) to provide wireless access to Yoctopuce modules from a mobile device without any additional infrastructure.

Moreover, the YoctoHub-Wireless-n features a built-in clock timer, which makes it possible to put the device into low-power deep sleep and wake-up automatically at predefined times. This makes it possible to reduce power consumption to 15uA while sleeping, which is crucial for applications running on battery or solar panels. The YoctoHub-Wireless-n only needs a few seconds of wake-up time to post data on an web server using the HTTP callback.

You can connect three Yoctopuce modules directly, one of which can be fixed directly on the YoctoHub-Wireless-n and connected using a Board2Board-127 connector. More devices can be connected, thanks to the YoctoHub-Shield extension. The YoctoHub-Wireless-n can power Yoctopuce devices up to 2A.

The device is provided with an articulated antenna (9cm, with RP-SMA connector) and a connection cable (uFL to RP-SMA). The use of a real antenna makes it possible to connect to an access point from significantly farther away than what most mobile phones and tablets can achieve.

Warning: although the 3 downstream ports hosting Yoctopuce devices use micro-B USB connectors, the YoctoHub-Wireless-n uses a specific protocol simpler than USB to talk to the devices. Therefore, it is not possible to drive or even to power a regular (non-Yoctopuce) device using the YoctoHub-Wireless-n. It is not possible either to use a regular USB hub (such as the Micro-USB-Hub) on the downstream ports. If you need more downstream ports for Yoctopuce devices, you can use a YoctoHub-Shield.

YoctoHub-Wireless-n YoctoHub-Wireless-n YoctoHub-Wireless-n

USB cables and enclosures to be ordered separately.

Specifications

Product ID:YHUBWLN4
Product name:YoctoHub-Wireless-n
USB connector:micro-B
Thickness:8.1mm
Width:58mm
Length:60mm
Weight:32g
Protection class, according to IEC 61140:class III
Normal operating temperature:5...40Ѓ
Extended operating temperature1:-30...85Ѓ
USB consumption:120mA
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
API / SDK / Libraries (TCP only):Javascript Node.js PHP
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Suggested enclosure:YoctoBox-HubWlan-Transp
Harmonized tariff code:9032.9000
Made in:Switzerland


1 The extended temperature range is defined based on components specifications and has been tested during a limited duration (1h). When using the device in harsh environments for a long period of time, we strongly advise to run extensive tests before going to production.

Accessories and related products

YoctoBox-HubWlan-Transp, Plastic enclosure for the YoctoHub-WirelessUSB-OTG-MicroB-MicroB-20, USB Cable OTG MicroB to MicroB 20 cmUFL-Wlan-Antenna, PCB internal antenna for 802.11 b/g/n/ax networks

Downloads

User manual (HTML)
User manual (PDF)
Blueprints
RoHS certificate
Most recent firmware43941 (02/19/2021)
Programming libraries44175 (03/12/2021)
Command line API44175 (03/12/2021)
VirtualHub application44029 (02/26/2021)


YoctoHub-Wireless-n

  • Brand: Yoctopuce
  • Product Code: YHUBWLN4
  • Availability:
  • $200.00