• MCU-040-QFN040-050050-013Y
' Dediprog
Package Type Number of Pin Type PCB Dimension IC Size(mm)
Length(D1) Width(E1) Height(A) Pitch(e) L Pins(D) W Pins(E)
QFN 40 Opentop 64*34 5 5 0.55 0.4

Adaptor Photo IC Drawing(mm)

* Only for IN518

Adaptor manual
1. Make sure the triangle mark on the bottom left PCB board aims at the triangle mark on the DediProg devices.
    For more detailed insertion direction, please download the document HERE
    Caution: Incorrectly installed the socket adaptor may cause device and socket damage.
2. Align the Pin 1 mark on the socket with the Pin 1 of the IC. Press down the top of the socket to insert the IC.
    Visually check the connection between the socket and the device, if it is connected properly, then the device is ready to program.
3. We recommended using a pick up tool for handling the socket. Do not touch the PCB board directly, because dirt and statics may cause errors during device programming.
4. Please remove the adaptor from the device after finish the work.
Note: There are different sizes of the socket adaptors for ProgMaster & NuProgPlus programmers.

ProgMaster Programmers
Standard Type
- 64 x 34mm (ProgMaster-U4/U8)

Special Type
- 64 x 54mm (ProgMaster-U4 only)
- 64 x 69mm (ProgMaster-U8 only)

NuProgPlus-U8
Standard Type
- MCU PCB (82 x 34mm)
- eMMC & UFS (108 x 34mm)

Special Type
- MCU PCB (108 x 68mm)

Supported ICs

IC PART NUMBER PACKAGE MANUFACTURER CHIP TYPE PROGRAMMER
HA5808-A01 QFN40 Himax MCU ProgMaster-U, StarProg-U
IN518 QFN40 GMT MCU ProgMaster-U, StarProg-U
IN518 QFN40 Himax MCU ProgMaster-U, StarProg-U
IN518 QFN40 NOVATEK MCU ProgMaster-U, StarProg-U
IN518 QFN40 Richtek MCU ProgMaster-U, StarProg-U
IN518-FI01 QFN40 Fitipower MCU ProgMaster-U, StarProg-U
IN518-FI01 QFN40 GMT MCU ProgMaster-U, StarProg-U
IN518-NT03 QFN40 NOVATEK MCU ProgMaster-U, StarProg-U
'

MCU-040-QFN040-050050-013Y

  • Brand: Dediprog
  • Product Code: MCU-040-QFN040-050050-013Y
  • Availability:
  • $472.50