• Your shopping cart is empty!

  • NAND-080-FBGA063-100130-001O
' Dediprog
Package Type Number of Pin Type PCB Dimension IC Size(mm)
Length(D1) Width(E1) Height(A) Pitch(e) L Pins(D) W Pins(E)
BGA 63 Opentop 64*34 10 13 1 0.8

Adaptor Photo IC Drawing(mm)

* Only for Parallel NAND Flash
Adaptor manual
1. Make sure the triangle mark on the bottom left PCB board aims at the triangle mark on the DediProg devices.
    For more detailed insertion direction, please download the document HERE
    Caution: Incorrectly installed the socket adaptor may cause device and socket damage.
2. Align the Pin 1 mark on the socket with the Pin 1 of the IC. Press down the top of the socket to insert the IC.
    Visually check the connection between the socket and the device, if it is connected properly, then the device is ready to program.
3. We recommended using a pick up tool for handling the socket. Do not touch the PCB board directly, because dirt and statics may cause errors during device programming.
4. Please remove the adaptor from the device after finish the work.
Note: There are different sizes of the socket adaptors for ProgMaster & NuProgPlus programmers.

ProgMaster Programmers
Standard Type
- 64 x 34mm (ProgMaster-U4/U8)

Special Type
- 64 x 54mm (ProgMaster-U4 only)
- 64 x 69mm (ProgMaster-U8 only)

NuProgPlus-U8
Standard Type
- MCU PCB (82 x 34mm)
- eMMC & UFS (108 x 34mm)

Special Type
- MCU PCB (108 x 68mm)

Supported ICs

IC PART NUMBER PACKAGE MANUFACTURER CHIP TYPE PROGRAMMER
MX30UF4GE8Ax-XKx VFBGA63 Macronix_MXIC PARALLEL_NAND ProgMaster-U, StarProg-U, StarProg-F, NuProgPlus, NuProg-E2
TC58NVG1S3EBAxx TFBGA063 TOSHIBA PARALLEL_NAND ProgMaster-U, StarProg-U, StarProg-F, NuProgPlus, NuProg-E2
TC58NVG2S3EBA FBGA63 TOSHIBA PARALLEL_NAND ProgMaster-U, StarProg-U, StarProg-F, NuProgPlus, NuProg-E2
'

NAND-080-FBGA063-100130-001O

  • Brand: Dediprog
  • Product Code: NAND-080-FBGA063-100130-001O
  • Availability:

  • $427.50