中文 | IPCkit | Online Chat
Home Products Resource Services Store About Us

    Services
Services
Quckily Design
IPC-SAM9G20 Case Custom-Design

 

How to Custom the Case interface for IPC-SAM9G20

How to Custom the Case interface for IPC-SAM9G20
``

For the front interface of the IPC-SAM9G20, it is extend from the Main Board, it is standard, it support the follow interface:
    Power input: 12V power in
    Two USB Host Port
    d100Mb/s Ethernet Port
    d1 x RS232 Serial Port
But for the back interface of the IPC-SAM9G20, it is extend from the extend board, it can be modified to your needs, you can tell us your needs, and we can complete it for you, more details refer to the follow steps.

Step 1. Find you needs.
The Back interface was extend by the extend board, and the extend board can be design with the follow resource:
Resource Function can be extend
6 x Serial Port GPRS, GPS, zigbee, RS485/RS422 interface
1 x CAN 2.0 BUS CAN Device, CAN interface
1 x SPI SPI interface, SPI device
1 x IIC IIC interface, IIC device
4 channel 10 bit ADC ADC interface
25 x GPIO interface LED, button, GPIO device and so on.
Notice: you can define your extend board for more functions with these interface.
Step 2. Confirm the interface position on the extend board
Confirm the interface postion, such as:

Then send your needs to us(market@armdevs.com), we will begin to do it.
Step 3. Wait it(2-4 weeks)
When we get your needs, we will begin do it as follow step:
Details Date
1. Design the schematic and PCB for the Extend Board < 2 weeks
2. Layout it and solder it < 1 weeks
3. Design the back of the Case for the Extend board < 1 weeks
4. Test it 1-2 days
If we finished it and test all success, then we will send the sample to you.
Step 4. Enjoy it
Get it and test it.
  Tel: +86-755-29638421  |    Sales Email: market@ipckit.com |  Support Email: support@ipckit.com | Gtalk: armdevs@gmail.com  
IPCkit.com | Copyright @2012 - CoreWind Technology Co.,Limited